how to make a paper towel | ehow - wet paper towels tissues
Paper towels are versatile and can be used as a convenient towel to clean up spills, dust, wipe sundries and dry hands.
Paper towels are made from raw materials such as wood products, recycled paper or plant fibers.
Making paper towels can be a bit complicated, which is why most of them are made.
But you can try to make your own paper towels at home with a little ingenuity and a lot of material.
Most of the equipment you need can be found in your kitchen.
Collect waste paper from the trash can or office trash can, you can ask the local business for broken paper, which is great from the beginning.
You may also want to add plant fibers such as celery, wheat, straw or bamboo, then cut the fibers into filaments and tear the paper into small pieces.
Put all the paper and fiber into a large pot, cover it with boiling water, and then add a caustic solution to remove any impurities.
Cook the pot on the stove for two to five hours, then drain the liquid and repeat the same process again.
The paper material should become a large amount of fat pulp, and any dirt or impurities should be separated from the fat pulp.
Remove these impurities with a filter and carefully mix the pulp with clear water and place it in a blender to crush the coarse mixture.
Paper towels are often bleached during this process, making the towel White by adding a small amount of bleach to the pulp or using colored fabric dyes to produce color in the towel.
Some brands contain low levels of resin or adhesive (glue, which prevents the fiber from falling off when it gets wet.
) As consumers are familiar with, paper towel manufacturers call it "wet strength" or "bounty tenacity ".
The expensive paper towel brand contains an additive that makes the paper towel feel "soft" rather than "tough ".
\ "When mixing, the quality of the pulp should become half
Liquid fiber material, then pour the milk oil slurry into the bathtub and add more water to maintain consistency.
The pulp is then prepared to be placed in casting or molding with a deckle frame.
The Deckle frame is installed on the mold to prevent excess pulp spills, and the mold and deckle frame are given shaking, which is two ways of winding and staggered fibers.
Patterns of shapes, such as squares, diamonds, or other images, are usually printed on paper towels to help keep moisture.
Most tissue rolls are made of two thin layers of paper. the more layers of towels, the stronger the tissue.
After forming a small piece of pulp and felt on the mold, the towel is allowed to drain in a short period of time, then repeat the process, remove the felt, pile up the sheets until the required tissue strength is formed.
The mold is lifted and the pile is now ready to be squeezed by any excess water.
Then, dry the paper in the open air.
Once the paper is dry, it is cut into different sizes.
Sizing can be done with a tablespoon of corn starch or unseasoned gelatin or any other starch substance.
The paper is placed in the tray where the gelatin is pulped and then press and dry repeatedly until the paper is completely dry.
Continue to press a series of steps of the paper forming process, remove the water between the roller and the felt, then dry to reach a certain level of moisture, and the Calender process, during the Calender process, when the paper is rolled or cut into pieces, the paper is compacted and smooth.
Another way to make paper towels is to use toilet paper with liquid starch, bowls, screens, cookie slices, towels and a heavy book.
Although the processing method is the same, there are fewer materials used.