how to mod podge paper onto wood | ehow - how to use delay wet tissue
Mod Podge is a decoupling media brand that sticks paper or fabric to the project like glue.
Mod Podge can decoupling paper to wood in a similar way to paperon-
Paper works, but the surface of the wood must be smooth and free of dirt and debris to attach well.
Mod Podge also acts as a sealer on your hand made work, so it can also be used to seal the decoupled surface.
Use fine sand to polish the area of wood you want to separate --grit sandpaper.
Wipe the dust with a sticky cloth or a soft cloth.
Cover the working surface with old plastic tablecloth and place wooden items on the tablecloth.
In this case, the plastic is better than the newspaper, because the drip Mod Podge may stick the newspaper to your project, and it will be more difficult to successfully tear off the paper.
Cut or tear off a few sheets of paper on the wood.
Arrange the paper on the wood project until you are satisfied with the layout.
Apply a thin layer of Mod Podge on the back of the paper once using a foam brush.
Press the paper on the wood in the desired area with your hand and smooth.
If you cover the whole area with a piece of paper, you can apply the model to the surface of the wood, just like painting.
Press the paper on the wood and flatten it.
Apply a piece of paper each time with the Mod Podge, then continue to smooth to the wood item in the desired position.
If working with curved wood or on the edge of a flat surface, wrap the paper to follow the outline of the wood and smooth it in all areas.
If you want to seal it, apply a thin layer of Mod Podge to the entire decoupling surface.
Once the first layer dries, apply the second layer coating to increase durability.