the care and feeding of your clear vinyl boat windows ... - best skin care products for over 40
Strataglass®Music letter®Organic Glass®, Isengass, crystal clear, eisengass, etc.
Whatever you call it, it comes from PVC (PVC) with certain properties ). 1. Vinyl is a UV-
Sensitive materials exposed to sunlight that degrade. 2.
The vinyl finish is included in the plasticizer and softener that keep the vinyl soft. 3.
No topcoat for clear vinyl.
(One exception to this rule is Strataglass with protective coating.
Unless otherwise stated, the proposal in this article applies only to untreated, transparent vinyl, and therefore does not include Strataglass. That\'s It!
In a simple lesson, you just need to know the vinyl boat window.
Keeping topcoat and preventing UV damage will make vinyl look good over the years.
In this climate, let's relax and continue reading in a month. . .
The sad fact is that all those lovely, clear vinyl windows, you are proud of them when they are new, will turn yellow, scratch, without proper care, become an ugly trouble in a very short time. Q.
You mean, doctor, you don't just hang up, uh, forget, uh? Who is that guy?
Unlike normal safety glass, it has a fairly hard surface, anti-scratch, and even a top for your vinyl seat
To protect the underlying material, the vinyl window needs a protective coating to separate it from the element.
Just like your skin.
With regular washing, sunscreen and moisturizer, our skin can enjoy the summer of the Emerald Coast without much trouble.
Eliminate one or more of them and stay out of 24/7 and even if we are only 20 we will soon look 102 years old.
At BoatDocs1, we first remove as much loose dirt as possible with a fine water spray.
It's better to wet the whole surface and let the water have time to soften anything that sticks to the window.
Next, we gently wash the surface with mild soap and aqueous solution.
Next, rinse the Windows thoroughly with more fresh water, then dry with a clean towel cloth towel or chamois.
After several years of experiments and research, we are sure that the only product used on vinyl is the 303 product, the aerospace protective agent.
I will let you go to their website, read a copy of them and find out why this is the best.
But note that I'm talking about copywriting, not hype, because after using it for over a year, I 've found that their ads are actually a bit low-key.
We treat it by spraying the product on both sides of the surface and then polishing it with a clean, dry and well worn towel cloth.
Older baby diapers are better, but are becoming more and more as rare as a dodo egg. .
Application from 4-
After 6 weeks, after the first few uses, it seems to become easier to maintain because the surface is actually sealed and there seems to be nothing to hold on.
The application increases visibility and reduces wear and scratches by reducing the friction factor.
In layman's terms, it just means it's smoother than a snail.
It also repels water, dust, dirt, salt and super
(SPF 40) the benefit of the increase is the resistancefog/anti-glare finish.
The monthly treatment will make these curtains look like new ones for years.
As for Strataglass®?
At the beginning of this article, I mentioned that Strataglass does not meet the general recommendation of conventional unhandled vinyl windows.
The reason behind this is that it is treated at the factory, using a special protective coating that will last the life of the fabric if maintained as they suggested, and prevent chemical loss, which is the reason for the problem of untreated fabrics.
I don't want to do too much detail on this as they do have their own website and have the care and cleaning advice they provide to their clients.
If you have a strategy®I suggest going to their website to see the curtains on your boat http://www . webworksgroup.
Html, look at their suggestions for the product.
What if we're too late?
We apologize if your vinyl windows have already started showing the effects of aging.
(Should be told earlier) we offer a repair service consisting of fine polishing and chemical treatment.
(Replacement of plasticizer) in many cases, we can eliminate most scratches, restore translucent properties, and increase the effective life of vinyl windows by several years through the continuous maintenance of the 303 aerospace shield
If you would like to replace some vinyl windows, let's take a look and see what we can do.
The service is quite reasonable compared to the replacement price.
Here's our step-by-step procedure for bringing back vinyl windowshope it helps.
This set of instructions is for windows with minor scratches and cracks.
If the scratches are deep, the process needs to start with wet sanding, which is a subject in itself and will not be covered in this article.
What we want to do here is polish any scratches, stains, defects, or rotate the mark from a very fine compound and then finish with a repair agent to replenish the plasticizer in vinyl.
You should find all these items in the car paint store.
First of all, you need a variable speed drill (1000-
1200 rpm), velcro back plate with acceptable foam rubber polishing pad.
You need 3 pads, but the extra pads save some time when replacing Poland.
Keep a mat for each compound or Poland.
When you ask them there if they carry a fine, Micro
A polished compound made specifically for transparent vinyl windows that you will use to actually remove scratches. If the sales-
People seem to know what they're talking about, picking his brain on most of the products he sells.
I have achieved excellent results with 3-1
M product called "Finesse -"
It is used for glue and vinyl and works well.
If there is no better result than this for your car supply trip, this will be done and you can use the rest of the ship.
Another product I highly recommend is isMeguiars, "Plastx", which is perfect for finishing (polishing) with a mat ).
It also makes a good occasional cleaning and preservatives all year round.
It uses the micro-decreasing grinding technology (MDAT) used in their paint and gel polish to produce a powerful but safe plastic cleaner.
If the scratch is light, you can get good results by just using this product and going through it several times with the buffer.
If you have experience in polishing, this is an advantage, although the technology used here is unique to the material, so it will be learned as you move forward.
We usually start with the smallest or least obvious window first, understand the required workload and check the results.
If there are several widgets, choose the one that is most damaged.
After completing a job, it is a good time to compare the cost of changing the window.
If time is not the most important consideration, but money is the most important, then the system will serve you well.
The first is to thoroughly clean the windows with mild (ivory good) soap and aqueous solution, rinse them, and then gently dry them with a soft cotton towel.
I prefer them when I can get the old cloth diapers, but they are almost extinct on my neck.
The main thing is to always use the softest, cleanest towels you can find on the windows, and now is a good time to start.
After the window is dry, place it on a firm, flat table with plenty of soft padding under it.
Make sure the liner is smooth and flat, otherwise leave an edge when polished.
Set the drill bit with the back plate and the first liner and apply enough polish to the window to cover 1 square foot section.
Start using the lightly pressed polishing part immediately and keep the pads moving.
The secret here is slow and easy, it's plastic instead of concrete.
Keep it moist (using a spray water bottle) and when the compound is close to running out, you will feel it, re-apply it to the adjacent parts and repeat the process.
Continue until the side is finished, then gently clean with the cleaning procedure outlined above.
When polishing and cleaning is done (on both sides), take a clean paddock and apply the plaster to the entire window according to the same procedure as composite/polishing.
When the window is completely covered, take a clean piece of cotton cloth and wipe off the haze.
Vinyl absorbs most of the plastic, which will help to feed and restore the plasticizer.
As the last procedure, I usually check the entire window with 303 products to make sure it is protected from UV radiation, the number one enemy of all vinyl and clear vinyl windows.
Do not use any type of plain window cleaner, detergent, abrasive, petroleum-based product or alcohol on vinyl windows.
They are too rough to damage the top coat and speed up the loss of the plasticizer.
The vinyl will dry, turn yellow and brittle, and will need to be replaced soon.
You 've seen this before, and now you know why.
At the same time, all your vinyl products, whether on board or on shore, are a big one.
Only the most mild soap solution, complete rinse and safe protective coating can make all your vinyl products look like new.